Go to Home Page

Alulinx® Weld Process Gas

One gas that does it all for aluminium and its alloys

A multi-purpose shielding gas specifically designed for high-quality welding of aluminium and its alloys. Alulinx® weld process gas has been specifically designed as the only gas that you need for the high-quality welding of aluminium and its alloys. If you aim for the most exacting standards, you will need a dedicated gas like Alulinx® weld process gas.

Alulinx® weld process gas gives superb weldability, combined with high welding speeds, up to 35% faster than is possible with argon, as well as promoting safety through low ozone generation.

​Alulinx® Weld Process Gas Gives Superb Weldability.

Combined with high welding speeds, up to 35% faster than possible with argon, as well as promoting safety through low ozone generation.

When you aim for the highest standards the elimination of weld metal porosity can be a problem. Alulinx® Plus gas with its controlled addition of helium is all that you need to give you the edge.

How Can Alulinx® Weld Process Gas Help When Welding Aluminium?​

Improved Productivity

An increase in manual weld speeds of up to 24% in MIG welding and up to 35% in TIG welding when compared with argon.

Fewer Rejects

Ultra low porosity levels and excellent fusion characteristics. This improves weld quality and means fewer rejects.

Improved Working Environment

Protecting the work environment with minimal ozone generation

Ask the Expert

“I want to increase my speeds, but not sacrifice quality – is this possible?”

Our Alulinx® Plus gas increases speeds and quality too. For example in 20 seconds you could TIG weld 50mm compared to 30mm with pure Argon.

See the Benefits of Our Linx® Gases Range

Whatever you’re welding, Air Products’ innovative range of welding gases will give you superior results. Formulated to boost output through a unique combination of weldability, weld quality and higher welding speeds, you’ll achieve more with fewer rejects.

SEEING IS BELIEVING: BOOK A DEMO

Ready to order?

BUY NOW

Air Products’ Gastrak® Service

Save money, increase productivity and improve quality. Whether you use single cylinders or have gases piped, the Gastrak® service can help.

  • Reduce costs:By eliminating pre-weld surge and excessive gas flow rates you will use less gas.
  • Improve quality:Consistent use of the optimum gas flow rate improves weld quality and reduces rejects
  • Easy installation: Gastrak® equipment can be integrated into an existing or new gas pipeline, or can be used with traditional or Integra® cylinders.
WANT TO START SAVING?

Supply Options

Air Products can help you determine the most economical supply option for your particular application and geographic location. Industrial gases are typically provided in gaseous and liquid form through a variety of supply systems.

Cylinders & Hard Goods

The traditional solution for low-volume gas supply. Cylinders can be supplied in a full range of sizes, pressures and gas purities for a range of gases and gas mixtures. Search our extensive network of distributors in the U.S. and parts of Canada for your cylinder and hard goods supply needs.

Welding Cutting Gases

A range of gases, technologies and services for metal fabrication, whether you are welding, cutting, thermal spraying, brazing or gouging.

RESOURCE CENTER

DATA SHEETS